Pintyplus Tech Sealer Spray

Rubber-based paint specially developed for sealing and waterproofing cracks, crevices and leaks.

Pintyplus Tech Sealer Spray

Pintyplus Tech sealer in spray is a rubber-based paint specially developed to seal and waterproof cracks, crevices and leaks appearing on any support or material: metal, aluminum, PVC, masonry, brick, siding, fiberglass, windows, rain gutters, non-pressurized pipes, roofing felt and similar. It is easy to use, dries quickly and can be repainted once the paint is dry.

Applications of Pintyplus Tech Sealer

 Ideal for waterproofing outdoor surfaces or structures, such as roof floors, balconies, roof terraces, as well as pipes, walls or facades, garden sheds and others.

Technical Characteristics

• Size 650/500ml
• Spreading 3m2
• Drying time for small crevices: 2h
• Drying time for large crevices: 5h
• Repainting after 72h
• Heat resistance 100ºC
• Matt finish
  
  

How to apply Pintyplus Tech Sealer

The surface to be painted must be dry, clean and free of any dirt. Clean rust and scale, if any, with a wire brush. Remove grease stains with solvent.

Shake the can vigorously for 1 minute after hearing the mixing balls. Spray from a distance of 25/30 cm., apply thin and quick layers, first horizontally and then vertically. It is advisable to give two thin coats and not one thick to achieve even coverage and avoid paint dripping. Once finished, turn the can upside down and press until only gas comes out to clean the nozzle.

Apply several coats until the desired thickness is achieved, depending on the application.

• If the crack or crevice is small, you will need less product; if it is larger, you will need more quantity.
• Wait 5 minutes between coats.
• Apply coats until the crack is sealed; if the product is sagging due to accumulation, this will not affect the seal.
• We must wait until the paint is dry before repainting.